Can't assign the port to the aggregation group because its attribute configurations are different than the aggregate interface.

在配置链路聚合的时候提示无法将端口分配给聚合组，因为其属性配置与聚合接口不同
Can't assign the port to the aggregation group because its attribute configurations are different than the aggregate interface.

解决：
先把物理口配置清除，聚合口配置清除。
先将物理口添加近聚合组内，然后再到聚合组内下发配置即可。
（就是物理接口没有添加到聚组内时，先不要配置聚合口的配置参数）
undo interface Bridge-Aggregation3
interface Bridge-Aggregation3
int g0/0/1
 port link-aggregation group 3
int g0/0/2
 port link-aggregation group 3
 
 interface Bridge-Aggregation3
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 7
 link-aggregation mode dynamic

链路聚合配置（端口聚合、链路聚合、LACP聚合）（列表、list、全）链路聚合list
http://www.zh-cjh.com/wenzhangguilei/963.html

文章归类、所有文章列表、LISTLIST
http://www.zh-cjh.com/wangzhangonggao/2195.html