H3C AC上实时观察某个终端的信号强度值 [AC-probe] dis sys internal wlan sacp anti-sticky factor mac-address xxxx-xxxx-xxxx
H3C AC上实时观察某个终端的信号强度值
#AC侧配置并观察某个终端实时信号值(辅助观察某个点位终端Rssi值变化情况)
[AC-probe] wlan sys internal sacp anti-sticky factor-report mac-address xxxx-xxxx-xxxx
[AC-probe] dis sys internal wlan sacp anti-sticky factor mac-address xxxx-xxxx-xxxx

[H3C_AC]display wlan client mac-address xxxx-xxxx-xxxx verbose
Total number of clients: 1
MAC address : xxxx-xxxx-xxxx
IPv4 address : 192.168.222.214
IPv6 address : xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxx0
Username : mac地址
AID : 2
AP ID : 668
AP name : APname
Radio ID : 1
Channel : 40
SSID : ssidname
BSSID : 7c7a-XXXX-XXXX
VLAN ID : 888
Service VLAN ID : N/A
Sleep count : 104
Wireless mode : 802.11ax
Channel bandwidth : 20MHz
SM power save : Disabled
Short GI for 20MHz : Supported
Short GI for 40MHz : Supported
Short GI for 80MHz : Supported
Short GI for 160/80+80MHz : Not supported
STBC RX capability : Supported
STBC TX capability : Not supported
LDPC RX capability : Supported
Beamformee STS capability : N/A
Number of Sounding Dimensions : N/A
SU beamformee capability : Not supported
MU beamformee capability : Not supported
Block Ack : TID 0 Both
Supported VHT-MCS set : NSS1 0, 1, 2, 3, 4, 5, 6, 7, 8
Supported HT MCS set : 0, 1, 2, 3, 4, 5, 6, 7
Supported rates : 6, 9, 12, 18, 24, 36,
48, 54 Mbps
5G 40And80MHz Channel bandwidth : Not Supported
5G 160MHz Channel bandwidth : Not Supported
5G 80+80MHz Channel bandwidth : Not Supported
OFDMA random access RUs : Not supported
Supported HE-MCS set : NSS1 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
TWT scheduled : no
QoS mode : WMM
Listen interval : 5
RSSI : 29
Rx/Tx rate : 43.9/8.6 Mbps
Speed : 1.528/1.984Kbps
Authentication method : Open system
Security mode : PRE-RSNA
AKM mode : Not configured
Cipher suite : N/A
User authentication mode : MAC
WPA3 status : N/A
SAE PWE Method : None
Authorization CAR :
Average input rate : 314572000 bps
Input committed burst size : N/A
Average output rate : 314572000 bps
Output committed burst size : N/A
Authorization user group name : N/A
Authorization ACL ID : N/A
Authorization dynamic ACL name : N/A
Authorization user profile : N/A
Roam status : Intra-AC roam
Key derivation : N/A
PMF status : N/A
Forwarding policy name : Not configured
Online time : 0days 3hours 50minutes 38seconds
FT status : Inactive
BTM mode : Inactive
Radio slice(Last effecive) : N/A
[H3C_AC]
[H3C_AC]
H3C AC上实时观察某个终端的信号强度值 [AC-probe] dis sys internal wlan sacp anti-sticky factor mac-address xxxx-xxxx-xxxx
http://www.zh-cjh.com/wuxian/5517.html
厂商自定义的 RSSI 值(正数情况)、有些厂商使用公式 dBm = RSSI - 100
http://www.zh-cjh.com/wuxian/6079.html
H3C无线:H3C无线的问题汇总、常用display命令、查看AC上的授权
http://www.zh-cjh.com/wuxian/202.html
H3C AC上实时观察某个终端的信号强度值 [AC-probe] dis sys internal wlan sacp anti-sticky factor mac-address xxxx-xxxx-xxxx
http://www.zh-cjh.com/wuxian/5517.html
2、本资源基本为原创,部分来源其他付费资源平台或互联网收集,如有侵权请联系及时处理。
3、本站大部分文章的截图来源实验测试环境,请不要在生产环境中随意模仿,以免带来灾难性后果。
转载请保留出处: www.zh-cjh.com珠海陈坚浩博客 » H3C AC上实时观察某个终端的信号强度值 [AC-probe] dis sys internal wlan sacp anti-sticky factor mac-address xxxx-xxxx-xxxx
作者: cjh
| 手机扫一扫,手机上查看此文章: |
一切源于价值!
其他 模板文件不存在: ./template/plugins/comment/pc/index.htm